All-aluminum lower turntable with thickened design
Conical disc system
Water bowl design
All-aluminum lower turntable with thickened design
Conical disc system
Water bowl design
Conical disc system
Water bowl design
FlatBase30/60+FlatHead-100 is a mechanical single-point loading automatic grinding and polishing machine in FlatSystem combined grinding and polishing machine. FlatBase30+FlatHead-100 is a single-disc mechanical single-point loading grinding and polishing machine. FlatBase60+FlatHead-100 is a double-disc mechanical single-point loading grinding and polishing machine. Grinding and polishing can be completed on the same machine. The machine comes with a water cooling device, which can perform multiple sample preparation steps from rough grinding to fine polishing on the sample.
The Flat System is made of a corrosion-resistant painted housing and is extremely durable.
The work plate is provided with a magnetic base by default and can be equipped with a pressure ring.
The operation panel is placed on the top to avoid water stains and damage caused by loose samples, and to avoid accidental changes in the speed setting.
An emergency button is provided.
The oval splash ring prevents water splashes and makes it easier to remove the work plate.。
Heavy lower turntable.
The thickened all-aluminum lower turntable is heavy and stable. The support and rotation are more stable. No matter how much pressure is applied, the chassis will run at a constant speed to ensure stability. At the same time, the large-mass chassis has sufficient heat capacity to offset the temperature rise, which can prevent overheating during rough grinding of samples.
The cone disc system can quickly remove the grinding disc, which is easy to clean and helps save time.
Supports 300mm working disc (44% more surface area than 250mm, improving sample preparation efficiency).
Speed changed with adjustment
FlatBase30+FlatHead-100 is a single-disc mechanical single-point loading grinder and polisher.FlatBase60+FlatHead-100 is a double-disc mechanical single-point loading grinder and polisher. The speed can be adjusted between 0~1000 r/min and changes with adjustment. (No need to stop the machine to adjust the speed)
Soft start
The grinding and polishing head starts softly to ensure that the sample will not be abraded due to the unevenness of the sandpaper and polishing cloth during automatic grinding and polishing,and extend the service life of the equipment.
Water bowl design
It can prevent abrasive particles from flowing into the sewer and causing blockage. It can also complete cleaning conveniently, always keeping the water tank clean.
Universal faucet
Free bending, unrestricted cleaning range, and arbitrary height adjustment.
Spring mechanical single-point pressure adjustment (5~30N)
Mechanical single-point loading pressure head, the pressure position can be adjusted. The screw thread adjusts the starting position of the presser foot, the built-in spring provides mechanical loading force, and the force scale is attached to the pull rod, and the specific pressure value can be read.
The external automatic liquid filling module can support 5~8 types of liquids with different particle sizes.
FlatBase30/60+FlatHead-100
FlatBase30/60+FlatHead-100 is a mechanical single-point loading automatic grinding and polishing machine in FlatSystem combined grinding and polishing machine. FlatBase30+FlatHead-100 is a single-disc mechanical single-point loading grinding and polishing machine. FlatBase60+FlatHead-100 is a double-disc mechanical single-point loading grinding and polishing machine. Grinding and polishing can be completed on the same machine. The machine comes with a water cooling device, which can perform multiple sample preparation steps from rough grinding to fine polishing on the sample.
|
No. |
Parameters |
FlatBase30+FlatHead-100
|
FlatBase60+FlatHead-100
|
FlatBase60+
|
|
1 |
Input voltage |
single phase AC220v 50Hz |
||
|
2 |
ample gripper with automatic rotatic |
single disc with single control(auto) |
dual discs with single control(auto) |
dual discs with dual- |
|
3 |
Operator at one time |
1 |
2 |
2 |
|
4 |
Single point pressurization range |
5~30N |
||
|
5 |
Dia.of G&P disc |
250mm( customize about ф300mm) |
||
|
6 |
Rotation speed of of G&P disc |
0~1000r/min |
||
|
7 |
Input power |
1KW |
2KW |
|
|
8 |
Outer size |
600X 768X526mm |
896mm×672mm×493mm |
|
|
9 |
N.G. |
60KG |
90KG |
|
PDF
下載
客戶說好才是真的好！無論產品還是服務，客戶的真實反饋，是我們持續進步的源泉。客戶的認可，是我們無尚的榮光。
“川禾Truer擁有經驗豐富的技術服務工程師和應用專家他們具備豐富的制樣技能和行業知識，能為您的材料和需求量身定制服務。對所售的設備提供上門安裝調試外，還提供專業的制樣技巧和實操經驗。對所售的設備實行一年保修，終身維護，并提供年度在線技術支持及上門技術培訓服務。”
滬公網安備31011802005507號
TOP
400 099 7576
新聞
服務
資料庫
400 099 7576
.jpg)
400-099-7576
021-34686739
021-34320902
13472638080 徐經理
中國 上海青浦 崧秋路299號3樓
